ALUSTEP® 500 SL, greater flexural resistance combined with the lightness of a panel with an aluminium honeycomb core and fiberglass skins.
STEP series panels are applied in the stone sector to lighten marble and natural stones, as a reinforcement and support structure for mosaics or in the restoration sector. Due to their lightness, these panels can be used in buildings interiors as a marble support for floors and worktops. In addition, they are used in boat and mega yachts interiors where lightness combined with high mechanical properties becomes a key point in this sector .
Technical features
ALUSTEP® 500 SL is a sandwich panel with an aluminium honeycomb core and fibreglass skins impregnated with epoxy resin. It is characterized by high bending resistance and good resistance to medium temperatures. The panels of the -STEP are purchased by art galleries as a support for their works. In particular, Disney has created some of its splendid mosaics using CEL Components panels.
A - SKIN IN GLASSFIBRE
490g/m2 impregnated with epoxy resin
B - CORE IN ALUMINIUM HONEYCOMB
(Alloy series 3000*) with hexagonal cells
Diameter in inches: Ø1/4”, Ø3/8”**
Foil thickness: from 50 to 70 microns
Thickness starting from 3,5 mm to 50 mm
* Serie 5000 on demand
** Ø3/8” on request
Dimensions
Applications
Technical datasheet
Technical data sheet for standard panels (dimensions, materials and special finishes on request) |
|||||||
TECHNICAL CHARACTERISTICS OF PANEL |
|||||||
thickness of the panel mm |
from 3,5 to 50 |
||||||
panel size mm |
standard 1250 x 2500 / 1500 x 3000
|
||||||
thickness’ tolerance mm |
± 0,3 |
||||||
dimension’s tolerance mm |
± 30 |
||||||
skins’ thickness mm |
0,4 |
||||||
glass fibre skin |
Glass fibre Plain 500 gr/m² |
||||||
honeycomb alluminium alloy |
3000 series / 5000 series |
||||||
thickness of honeycomb foil μm |
50 and 70 |
||||||
diameter of honeycomb Ø = mm |
from 3 to 19 |
||||||
honeycomb density Kg/m³ |
from 20 to 116 |
||||||
adhesive for aluminum honeycomb |
Epoxy Resin |
||||||
PANEL PHYSICAL AND MECHANICAL PERFORMANCES |
|||||||
type panel (some examples) mm |
5 |
10 |
15 |
20 |
25 |
30 |
35 |
panel weight ‡ Kg/m2 |
1,9±0,2 |
2,2±0,2 |
2,5±0,2 |
2,8±0,2 |
3,1±0,2 |
3,3±0,2 |
3,5±0,2 |
compressive stabilised strength MPa ** ‡ ASTM C 365-365 M Mpa |
2,9 ± 0,3 |
||||||
maximum load ** ‡ ASTM C 393 † N |
130 |
270 |
420 |
570 |
720 |
850 |
1000 |
deflection at maximum load ‡ ASTM C 393 † mm |
42±6 |
20±3 |
14±2 |
11±2 |
8±1 |
7±1 |
6±1 |
skins E Elastic Modulus ** Mpa |
26.000±2.000 |
||||||
moment of inertia I ** mm4/m |
4.200 |
18.400 |
42.600 |
76.800 |
121.000 |
175.400 |
239.940 |
middle resistance to peeling ** ‡ ASTM D1781-98 (2012) |
> 500 N/76 mm or >55 Nmm/mm |
||||||
maximum service temperature ** °C |
- 50 / + 90 |
||||||
thermal expansion coefficient ** °C-1 |
1,5 * 10^-5 / 1,5 mm for ΔT 100 °C for 1 meter length |
||||||
* Tested by external Laboratory
** Tested by Internal Laboratory
‡ All values refer to a panel made of aluminum honeycomb with a cell diameter 6 mm 56 kg/m3 and epoxy adhesive
† Sample dimension with 4 support points (L, W) 540x540; distance among the lower points 500mm.
| CONFORM TO AMERICAN STANDARDS | ||||
|
ASTM C67-M18 Water Absorption |
ASTM E72-15 Strength-Transverse load |
ASTM C297 M-16 Flatwise tensile strength |
ASTM E84-17 Flamespread |
TAS 201 Impact and Cyclic Wind Pressure |
Honeycomb core’s properties |
50 Microns |
||
Type |
Aluminium Alloy 3003/3005/3103/3104 |
||
Ø honeycomb in mm ca. |
6 |
9 |
|
Ø honeycomb in inches |
1/4" |
3/8" |
|
Density kg/m3 |
56 - 59 |
39 - 40 |
|
Compressive stabilised strength MPa |
3,0 - 3,5 |
1,4 - 1,95 |
|
Honeycomb core’s properties |
70 Microns |
||
Type |
Aluminium Alloy 3003/3005/3103/3104 |
||
Ø honeycomb in mm ca. |
6 |
9 |
|
Ø honeycomb in inches |
1/4" |
3/8" |
|
Density kg/m3 |
80 - 83 |
54 |
|
Compressive stabilised strength MPa |
4,3 - 4,6 |
2,5 - 2,6 |
|
LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and their potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular application. We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale.
IMPORTANT
To allow us to offer you a panel with particular finishes or colors without minimal pigment variations, it is recommended to place an overall order , so that we can plan the production with the rolling mills that will carry out the painting of the sheets in a batch.