The COMPOCEL® Inox sandwich panel is a panel with steel skins AISI 304 e AISI 316 and an aluminium honeycomb core.
The COMPOCEL Inox panel is normally used as a decorative panel in many applications
A - STAINLESS STEEL SKINS
Thickness mm: 0,5 - 1 (standard)
ALLOY AISI 304 and AISI 316
Finition on request
Glue: 400 gr/m2
B - STRUCTURAL ADHESIVE
C - Aluminium honeycomb
(Alloy series 3000*)
Diameter: Ø1/4”, Ø3/8”, Ø1/2”, Ø3/4”
Thickness Foil: from 50 to 70 microns
On request:
Thickness starting from 3 mm to 300 mm
* To Aluminium alloy series 3000 belong: Aluminium alloy 3003, Aluminium alloy 3005, Aluminium alloy 3103, Aluminium alloy 3104.
Dimensions
Applications
Technical datasheet
Panel’s weight Ø6 56kg/m3 (Ø 1/4”) |
||||||
• Thickness’ tolerance ± 0,3 mm
|
||||||
Total thickness mm |
6 |
15 |
10 |
15 |
20 |
25 |
SKINS’ thickness mm |
0,5 + 0,5 |
1 + 1 |
||||
CORE’S thickness mm |
5 |
14 |
8 |
13 |
18 |
23 |
Weight kg/m2 |
9,1 |
9,6 |
17,3 |
17,6 |
17,8 |
18,1 |
Honeycomb core’s properties |
50 Microns |
|||
Type |
ALUMINIUM ALLOY 3003/3005/3103/3104 |
|||
Ø honeycomb in mm |
6 |
9 |
12 |
19 |
Ø honeycomb in inches |
1/4" |
3/8" |
1/2" |
3/4" |
Density kg/m3 |
56 - 59 |
39 - 40 |
29 - 30 |
20 - 21 |
Compressive stabilised
|
3,0 - 3,5 |
1,4 - 1,95 |
0,8 - 0,95 |
0,4 - 0,6 |
Honeycomb core’s properties |
70 Microns |
|||
Type |
ALUMINIUM ALLOY 3003/3005/3103/3104 |
|||
Ø honeycomb in mm |
6 |
9 |
12 |
19 |
Ø honeycomb in inches |
1/4" |
3/8" |
1/2" |
3/4" |
Density kg/m3 |
80 - 83 |
54 |
40 - 42 |
27 - 29 |
Compressive stabilised
|
4,3 - 4,6 |
2,5 - 2,6 |
1,41 - 1,5 |
0,85 - 0,9 |
LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and their potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular application. We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale.
IMPORTANT
To allow us to offer you a panel with particular finishes or colors without minimal pigment variations, it is recommended to place an overall order , so that we can plan the production with the rolling mills that will carry out the painting of the sheets in a batch.